5. Configuration

The driver auto-detects all device information necessary to initialize the card. The only lines you need in the "Device" section of your XF86Config file are:

       Section "Device"
           Identifier "i810"
       EndSection

However, if you have problems with auto-detection, you can specify:

• DacSpeed - in MHz
• MemBase - physical address of the linear framebuffer
• IOBase - physical address of the memory mapped IO registers

In order to use most resolutions, it is necessary to install the 'agpgart.o' module which accompanies this server. You will probably have to compile the module yourself (see the notes in the module).

Note: the i810 X server detects whether your motherboard has display cache video memory. This memory is has reduced bandwidth compared to 'normal' system memory, and isn't used by the server. The main function of this memory is for ancillary buffers (eg. z buffer) in a forthcoming 3d capable server.