To make sure X support is enabled under OpenBSD, the following
line must be in your config file in
option XSERVER option APERTURE
The server supports the two standard OpenBSD/i386 console drivers: pcvt and pccons. They are detected at runtime and no configuration of the server itself is required.
The pcvt console driver is the default in OpenBSD up to OpenBSD 2.8. It offers several virtual consoles and international keyboard support.
OpenBSD-current after 2.8 has switched to the wscons console driver. This console driver has a pcvt compatibility mode for X support.
By default OpenBSD includes the BSD 4.4 kernel security
feature that disable access to the
/dev/mem device when in
multi-users mode. But the XFree86 server require
linear access to the display memory in most cases.
OpenBSD now requires the aperture driver to be enabled for all X servers, because the aperture driver also controls access to the I/O ports of the video boards.
To enable the aperture driver, once included in the kernel, set
Some drivers need a patch to the aperture driver in the kernel to work correctly with int10 support. If you get warning from xf86ReadBIOS like this one:
you should patch your kernel and rebuild it. Until it's integrated in OpenBSD-current, or a better fix is found, the patch is available at ftp://ftp.laas.fr/pub/ii/matthieu/OpenBSD/patch-kernel-xf4.
(II) checkDevMem: using aperture driver /dev/xf86 (WW) xf86ReadBIOS: /dev/mem mmap[s=600,a=0,o=0] failed (Invalid argument)
I've also included it below, if you want to edit the source file by hand.
Index: sys/arch/i386/i386/mem.c =================================================================== RCS file: /cvs/src/sys/arch/i386/i386/mem.c,v retrieving revision 1.14 diff -u -r1.14 mem.c --- sys/arch/i386/i386/mem.c 1999/11/20 11:11:28 1.14 +++ sys/arch/i386/i386/mem.c 2000/11/13 10:54:22 @@ -269,8 +269,8 @@ /* minor device 4 is aperture driver */ case 4: if (allowaperture && - (((off >= VGA_START && off <= BIOS_END) || - (unsigned)off > (unsigned)ctob(physmem)))) + (off <= BIOS_END || + (unsigned)off > (unsigned)ctob(physmem))) return i386_btop(off); else return -1;
In post 2.8 OpenBSD-current, a modified version of this patch has been integrated. You should set
/etc/sysctl.confin order to achieve this. See the xf86(4) manual page for details.
Another (less recommended) way to enable linear memory and I/O ports
access is to disable the kernel security feature by adding ``option
INSECURE'' in your kernel configuration file and build a new kernel.
You will also need to comment out the line
securelevel to 1 in
Caveat: the aperture driver only allows one access at a time (so that the system is in the same security state once X is launched). This means that if you run multiple servers on multiples VT, only the first one will have linear memory access. Use 'option INSECURE' if you need more that one X server at a time.
OpenBSD supports System V shared memory. If XFree86 detects this support in your kernel, it will support the MIT-SHM extension.
To add support for system V shared memory to your kernel add the lines:
# System V-like IPC options SYSVMSG options SYSVSEM options SYSVSHM
to your kernel config file.